Triangle construction, 30°
Mounting triangle for 2 panels east + west on a flat roof or roof with a small pitch. Compared to the standard structures offered for flat roofs, this system has a higher slope, allows the panel to be fixed at the optimum distance (beware of sagging of panels fixed only on the sides!) and can be loaded with concrete squares of any size.
| Category: | Products |
|---|
- standardly 2pcs triangles for mounting 2pcs panels up to xxx width, price per 1 pc
- Laser-welded construction
- Already includes square nuts M6 4pcs
- Thanks to the optimal east + west design, there is no need to address additional bracing
- Higher inclination compared to commonly available solutions better prevents dirt from adhering in the lower corners of the panels
- Weight approx. 3.5kg / pc
- not a complete mounting system - does not include ballast tiles, load-spreading rails, shims according to the type of roofing, etc.
Two mounting options:
"z"
- "Z" brackets on the longer side of the panel
- a total of 8 brackets / 2 panels
- for mounting 8pcs panels (4 east, 4 west), 8pcs triangles are needed
- it is necessary to make a triangle with sufficient reserve on both sides for the Z brackets
"omega"
- "omega" brackets in the middle (9 triangles per 8 panels - see photo)
- the triangle can be made "tightly" with respect to the width of the panel
- if the panel does not need to be supported in the middle, the consumption of triangles is smaller, i.e., 5pcs / 8 panels
- if it is necessary to support in the middle, 9pcs triangles / 8 panels are needed
Be the first who will post an article to this item!
Add a comment