Wall-mounted charging station for electric vehicles (wallbox)

Contains the following components:

• EVSE-DIN-485-RJ12 + RCD current sensor
• 3-phase 16A circuit breaker
• 4x40A contactor
• Black Type 2 connector + 5x2.5mm² cable + CP, length 7.5 m
• Jangar distribution box + cable holder

Advantages compared to other wallboxes:

• Cost-effective yet expandable solution
• Includes 7.5 m cable and Type 2 connector (11 kW)
• RS485 communication
• Option to equip with a Smart module and RFID reader

How to add an RFID reader or enable charged energy measurement?

• It is necessary to install the Smart Module for EVSE (WiFi + RS485) and place the RFID reader (e.g., attach it) on the enclosure lid
• Please note: this is not a DIY kit for regular users, but a full professional modification of the distribution board!
• We can prepare the wallbox including the RFID reader for you upon request

How to connect the charging station to a cloud service, Home Assistant, or general home automation?

• If you do not plan to use the Smart Module (one per charging station) or IoTmeter (one for multiple stations), RS485 works perfectly
• With the Ethernet converter Protoss PE11, you can connect one or multiple stations (each station has its own Modbus ID)
• Data can be read in systems such as HA, Node-RED, Tecomat Foxtrot, Loxone, etc.
• With the Smart Module / IoTmeter, you can easily use the HTTP API (GET http://IP:8000/updateData), which returns JSON with values

Is a 22 kW version available?

• Yes (replace the 3-phase 16A circuit breaker → 3-phase 32A and replace the cable)

Custom logo marking on the enclosure lid is possible. Connection to the wiring is done using Wago terminals up to 6mm² (included in the enclosure).